Under the same conditions, choose the combination of clean and heating with the lowest cost and the least pollutant emission Taipei luxury hotel. Therefore, relevant national and local policies Taipei luxury hotel, standards and plans should be based on the above-mentioned principles and serve the “initial heart” and “mission”. The optimal technical route according to local conditions should be based on different heating methods Taipei luxury hotel. The clean heating technology route can be divided into centralized and decentralized. Decentralized heating methods mainly include individual-type natural gas heating Taipei luxury hotel, individual-type heat pump heating, and individual-type biomass heating. Others include natural gas cogeneration Taipei luxury hotel, “solar +”, and a combination of different technology routes, but the current scale of application in northern regions is relatively small. Affected by many factors Taipei luxury hotel, even the actual cost of different projects on the same technical route is not the same. In terms of initial investment costs , in the central heating method, the initial investment per unit area of gas boilers is lower than that of coal-fired boilers. The initial investment per unit area of biomass boilers and industrial waste heat is equivalent to that of coal-fired boilers. The unit cost of residential biomass stoves is lower. Is 0.7 to 0.8 times that of coal-fired boilers; heat pump heating mainly includes air source heat pumps and ground source heat pumps. Here, the air source heat pump is used as an example. When the cost of distribution network reconstruction is not considered, the individual air source heat pump (hot air) Type) The investment cost per unit area is slightly lower than that of coal-fired boilers. In terms of operating costs, the operating costs of geothermal and industrial waste heat heating are the lowest in centralized heating methods, and the operating costs of mid-deep geothermal heating are lower than coal-fired boilers. The operating cost of coal-fired back pressure is equivalent to that of a coal-fired boiler (when the heating season reaches more than 5 months, the operating cost of a back-pressure machine is lower than that of a coal-fired boiler), and the operating cost of a gas-fired boiler is the highest. In the decentralized heating method, the operating cost of individual biomass heating is the lowest, which is only 0.7 times that of coal-fired boilers. Heat pump heating is equivalent to coal-fired boilers. The operating costs of wall-mounted boilers are 1.5 to 2.0 times that of coal-fired boilers. In particular, the distributed heating method is convenient and flexible, and can be used as needed, and the operating cost can be controlled at a lower level. The implementation plan should be selected in accordance with the principle of “centralization should be centralized, dispersed should be dispersed”, within the coverage of the urban heat network, clean coal-fired centralized heating should be used as much as possible. It should be particularly noted that in the above several methods, regardless of the initial investment or operating cost per unit area, the individual biomass heating has a lower cost, which is generally affordable for ordinary households, while taking into account heating and cooking. In the north Rural areas have great potential for promotion and application. Even if the clean heating rate in rural areas reaches the target of 50% in 2021, another 50% of rural residents will use non-clean heating methods such as loose coal to promote household-based biomass heating. Reducing pollution from this part of the coal is also of great significance.
https://www.sherwood.com.tw/en